loader
Home > Shop

RODE NTG4+ Shotgun Microphone




Price: OMR 103.000
*VAT Exclusive

Key Features
  • For Indie Films, TV & Documentaries
  • Convenient Digital Switching
  • Internal Battery or Phantom Powered
  • Switchable Treble Boost and -10 dB Pad
  • Selectable 75 Hz Low-Cut Filter
  • Low-Noise Circuitry
  • High Sensitivity and High Max SPL
  • Warm and Natural Tone
  • Windscreen Reduces Wind Noise
  • Lightweight Metal Housing
  • Contact us for delivery in Muscat, Oman.

Quality Sound Capture

The combination of the 10.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

 

Internal Battery or Phantom Powered

Operate the NTG4+ on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time. The micro-USB port and supplied USB cable enable easy recharging in just two hours—charge the NTG4+ via a computer, power brick, or vehicle. Thanks to its 3-pin XLR output, the NTG4+ is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

 

Customizable Tone via Digital Switching

Digital switching not only allows for intuitive access to the mic's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.

 

Ideal for Boompole Mounting

The lightweight, metal-bodied NTG4+ includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

 

Windscreen Minimizes Wind Noise

The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

 

Contact us for delivery in Muscat, Oman.

Rode NTG4+ Specs

 

Microphone

Form Factor Stand/Boom-Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Diaphragm 0.5" / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad -10 dB
High-Pass Filter 75 Hz 
Tone Adjustment High Boost:
+6 dB 
Indicators Single LED (Status, Power)
On-Board Controls High-Pass Filter, HF, Pad, On/Off
Windscreen Foam (Included)

 

Performance

Frequency Range 20 Hz to 20 kHz 
Maximum SPL 135 dB SPL
Off-Axis Rejection 5 dB at 60°
24 dB at 120°
18 dB at 180°
Impedance 200 Ohms
Sensitivity -32 dBV/Pa at 1 kHz
Dynamic Range 119 dB
Signal-to-Noise Ratio 78 dB 
Equivalent Noise Level 16 dB A-Weighted

 

Connectivity

Output Connectors 1 x XLR 3-Pin

 

Power

Operating Voltage 48 V
Operating Current Consumption 4.8 mA (Phantom Power)
Battery Type 1 x Built-In
Battery Chemistry Lithium-Ion
Approximate Battery Life 150 Hours

 

Physical

Color Black
Mounting 3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material Metal
Dimensions ø: 0.87 x L: 10.94" / ø: 22 x L: 278 mm
Weight 6.21 oz / 176 g (Microphone)

 

Packaging Info

Package Weight 1.36 lb
Box Dimensions (LxWxH) 13.05 x 5.2 x 2.65"

if you have any question please call us

968 96772828